Turning on:
- Check that the voltage in your home is the same as product rated voltage, if they are different do not use this product.
- Insert the power plug into the socket and turn the power switch on
- Press the power button to turn your Clip Curler on.
Temperature Settings:
Your Clip Curler will start at the default temperature of 120oC, to adjust the temperature press the + or – button. The temperature can be increased or decreased in 5oC increments between 120oC - 230oC. The temperature will flash 3x then stay constant to indicate the temperature selected.
Your Clip Curler will display its current temperature as it moves to your chosen temperature so you always know when it’s ready and what temperature you’re using on your hair.
Your Clip Curler will remember the temperature you used it at last and next time you use it, will start at that temperature.
Tight curls or bouncy waves?
Great news! You’re able to achieve both with your Kaleo Professional Clip Curler. For tight curls use smaller sections of hair, and wind it tight on the barrel of your Clip
Curler. If you’re after a looser wavy look, use larger sections of hair and keep it looser while setting on the barrel.
Usage tip:
The clip helps by holding your hair on the barrel while it sets, press the barrel clip handle to open the clip, wind a 2cm section of your hair around the barrel then release the handle once your hair is in place on the barrel. Hold for around 10 seconds then press the barrel clip handle again to release your hair and slide it off the barrel
Turning off:
- To turn your Clip Curler off press and hold the power button for 2 seconds, the display will switch off when your Clip Curler is off.
- Ensure you then switch the power off and unplug your Clip Curler from the socket. If you do forget to switch your Clip Curler off, it will go into hibernation after 60 minutes.
- Your Clip Curler will take some time to cool down, so ensure it is in a safe place while it cools.